| After-sales Service: | Yes |
|---|---|
| Connection: | Thread |
| Head Code: | Round |
| Thread Distribution: | Internal Thread |
| Surface: | Galvanized |
| Material: | Iron |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Code:SCC
Size: 1/2''-2''
Material: BS EN 1562,EN-GJMB-350-10,KTH350-10
Dimension: BS EN 10242
Thread: ISO 7-1,BS 21,BSPT
Pressure Rating: PN16/PN25
Surface Treatment:Hot-dip Galvanized,Electro Galvanized,Black
Certificate: UL Listed / FM Approved / NSF 61
Application: Fire Protection,Waterworks,HVAC,Plumbing,GAS,Irrigation,or other piping systems
Malleable Iron SCC Short Compression Coupling. SCC is a kind of connection pipe fittings commonly used in plumbing installation,Fire Protection,Waterworks,HVAC,Plumbing,GAS,Irrigation,or other piping systems. It is used for the connection of pipe bends. According to the production process, it can be divided into: welding elbow, forged elbow, push elbow, casting elbow, butt welding elbow, etc. Malleable Iron SCC Short Compression Coupling is a kind of casting coupling, through melting, annealing, and then machined into pipe fittings. This material pipe fittings have good malleable castability, are relatively easy to process, and have a certain strength. Fittings are used in piping systems with working pressures between 1.6MPa to 2.5MPa. The connection of the piping system is connected by threads, and the threaded connections are sealed with pipe thread seal tape or sealant. There are three ways of surface treatment of pipe fittings: hot-dip galvanizing, electro-galvanizing and black. Galvanizing can make the pipe fittings have good anti-rust, anti-corrosion and other properties. Hot-dip galvanizing is done by placing the pipe filigents in the melted zinc liquid, and the thickness of the zinc layer is relatively thick, which can reach more than 70um. Electro galvanizing, also known as cold galvanizing, is to put the zinc block in the electrolyte, and then through electrostatic adsorption to make zinc ions attach to the surface of the pipe fittings, the thickness of the zinc layer is uniform, but the thickness of the zinc layer is thin, the thickness is more than 25um.
| Size | A(mm) | PCS/CTN. |
| 1/2" | 93 | 100 |
| 3/4" | 101 | 70 |
| 1" | 109 | 48 |
| 1-1/4" | 114 | 30 |
| 1-1/2" | 118 | 20 |
| 2" | 121 | 16 |
| 2-1/2" | 154 | 8 |
| 3" | 175 | 6 |
"Chain-and-cable quality management" is a system of layer-by-layer mutual inspection in the production process, one link after another, the whole process has no omissions, timely detection of defective pipe fittings and product defects, through layer-by-layer mutual inspection, every worker become inspectors of the previous process, and at the same time link the inspection work with the performance income of the workers, stimulate the enthusiasm of the workers, actively and quickly find defective pipe fittings or defective malleable iron pipe fittings, and correct them in time, which not only ensures the qualified rate of the GI fittings, but also reduces the risk due to Production costs caused by defective MI fittings.
The quality of the pipe fittings can pass the examination and certification of most countries in the world. At present, the international certifications we have obtained are as follows:
United States: FM, UL certification
EU: CE certification
Brazil: ABNT certification
Turkey: TSE certification
Indonesia: SNI certification
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}