Ductile Iron ASTM A536, 65-45-12 2′′*1′′-8′′*6′′grooved Reducing Tee

• Customization: Available
• After-sales Service: Yes
• Warranty: 3 Years
• Model NO.: XGQT04
• Connection: Grooved Connection
• Structure: Universal
• Flexible or Rigid: Flexible
• Material: Iron
• Standard: Standard
• Material Standard: Ductile Iron ASTM A536/65-45-12
• Dimension: ISO6182/Awwa C606/GB 5135.11
• Connection Standard: ASME B36.10/ASTM A53-A53m/ISO 4200
• Pressure Rating: 175psi-500psi
• Surface Treatment: Red Painting/Epoxy Coating
• Gasket: EPDM/Nitrile/Silicone Rubber
• Application: Fire Protection/Waterworks/HVAC/Plumbing/Gas
• Certificate: UL Listed / FM Approved
• Transport Package: Carton with Pallet
• Specification: 2′′*1′′-8′′*6′′
• Origin: China
• HS Code: 7307110000
• Production Capacity: 50000 Tons / Years

Product Description

Features

A grooved reducing tee is a special type of pipe fitting used in piping systems. It is designed to connect three pipes of different diameters in systems requiring fluid flow or material transfer. A reducing tee has two openings of the same size and a third, smaller opening. Grooving in fittings refers to a method of joining pipes, usually involving grooved ends on the pipes that are held together by gaskets and fittings.

The function of a grooved reducing tee in a piping system is to achieve effective and controlled flow of fluids or substances by connecting pipes of different sizes. This type of tee is typically used when there is a need to distribute or combine flows of different volumes or to accommodate changes in pipe diameter within the system.

Standards for grooved pipe fittings are often set by industry organizations or regulatory agencies to ensure compatibility, quality and safety. American National Standards Institute (ANSI)/National Fire Protection Association (NFPA) Standard 53 is a widely recognized standard for grooved pipe fittings that covers grooved end pipe fittings used in fire protection services. Another standard is International Organization for Standardization (ISO) 6182, which provides specifications for grooved end fittings for metal pipes.

Be sure to check the specific standards and codes that apply to your region, industry, or project as they may vary. Consulting local building codes, industry regulations, or manufacturer guidelines is critical to ensuring compliance and safe operation within your duct system.

 

PRODUCTS DETAILS

A grooved reducing tee is a special type of pipe fitting used in piping systems. It is designed to connect three pipes of different diameters in systems requiring fluid flow or material transfer. A reducing tee has two openings of the same size and a third, smaller opening. Grooving in fittings refers to a method of joining pipes, usually involving grooved ends on the pipes that are held together by gaskets and fittings.

The function of a grooved reducing tee in a piping system is to achieve effective and controlled flow of fluids or substances by connecting pipes of different sizes. This type of tee is typically used when there is a need to distribute or combine flows of different volumes or to accommodate changes in pipe diameter within the system.

Standards for grooved pipe fittings are often set by industry organizations or regulatory agencies to ensure compatibility, quality and safety. American National Standards Institute (ANSI)/National Fire Protection Association (NFPA) Standard 53 is a widely recognized standard for grooved pipe fittings that covers grooved end pipe fittings used in fire protection services. Another standard is International Organization for Standardization (ISO) 6182, which provides specifications for grooved end fittings for metal pipes.

Be sure to check the specific standards and codes that apply to your region, industry, or project as they may vary. Consulting local building codes, industry regulations, or manufacturer guidelines is critical to ensuring compliance and safe operation within your duct system.
 

DRAWING:


  

Nominal Size mm/in	Pipe O.D mm	Working Pressure PSI/Mpa	Dimensions mm/in		Certificate
			∅	L
50X25/2X1	60.3X33.7	300/2.07	70/2.57	70/2.57	FM  UL
50X32/2X1Y4	60.3X42.4	300/2.07	70/2.57	70/2.57	FM  UL
50X40/2X112	60.3X483	300/2.07	70/2.57	70/2.57	FMUL
65X32/212X114	73.0X42.4	300/2.07	76/3.00	76/3.00	FM  UL
65X40/212X112	73.0X483	300/2.07	76/3.00	76/3.00	FM  UL
65X50/212X2	73.0X60.3	300/2.07	76/3.00	76/3.00	FMUL
65X40/30DX112	76.1X48.3	300/2.07	76/3.00	76/3.00	FM  UL
65X50/30DX2	76.1X60.3	300/2.07	76/3.00	76/3.00	FM  UL
80X40/3X112	88.9X48.3	300/2.07	86/3.38	86/3.38	FMUL
80X50/3X2	88.9X60.3	300/2.07	86/3.38	86/3.38	FM  UL
80X65/3X212	88.9X73.0	300/2.07	86/3.38	86/3.38	FM  UL
80X65/3X3OD	88.9X76.1	300/2.07	86/3.38	86/3.38	FMUL
100X65/414ODX3OD	108.0X76.1	300/2.07	102/4.01	102/4.01	FM  UL
100X80/414ODX3	108.0X88.9	300/2.07	102/4.01	102/4.01	FM  UL
100X50/4X2	114.3X60.3	300/2.07	102/4.01	102/4.01	FM  UL
100X65/4X2/2	114.3X73.0	300/2.07	102/4.01	102/4.01	FM  UL
100X65/4X3OD	114.3X76.1	300/2.07	102/4.01	102/4.01	FM  UL
100X80/4X3	114.3X88.9	300/2.07	102/4.01	102/4.01	FMUL
125X50/5120DX2	139.7X60.3	300/2.07	124/4.88	124/4.88	FM  UL
125X80/5120DX3	139.7X88.9	300/2.07	124/4.88	124/4.88	FM  UL
125X100/5120DX4	139.7X114.3	300/2.07	124/4.88	124/4.88	FM  UL
150X65/6140DX3OD	159.0X76.1	300/2.07	140/5.50	140/5.50	FMUL
150X80/614ODX3	159.0X88.9	300/2.07	140/5.5C	140/5.50	FM  UL
150X100/614ODX414OD	159.0X108.0	300/2.07	140/5.50	140/5.50	FM  UL
150X100/614ODX4	159.0X114.3	300/2.07	140/5.50	140/5.50	FMUL
150X50/612ODX2	165.1X60.3	300/2.07	140/5.50	140/5.50	FM  UL
150X65/6120DX3OD	165.1X76.1	300/2.07	140/5.50	140/5.50	FM  UL
150X80/6120DX3OD	165.1X88.9	300/2.07	140/5.50	140/5.50	FM  UL
150X100/6120DX4	165.1X114.3	300/2.07	140/5.5C	140/5.50	FM  UL
150X125/6120DX512OD	165.1X139.7	300/2.07	140/5.50	140/5.50	FM  UL
150X50/6X2	168.3X60.3	300/2.07	140/5.50	140/5.50	FM   UL
150X65/6X212	168.3X73.0	300/2.07	140/5.50	140/5.50	FM   UL
150X65/6X3OD	168.3X76.1	300/2.07	140/5.50	140/5.50	FM  UL
150X80/6X3	168.3X88.9	300/2.07	140/5.50	140/5.50	FM   UL
150X100/6X4	168.3X114.3	300/2.07	140/5.50	140/5.50	FM  UL
200X100/8X4	219.1X114.3	300/2.07	175/6.89	175/6.89	FM  UL
200X125/8X5120D	219.1X139.7	300/2.07	175/6.89	175/6.89	FM  UL
200X150/8X614OD	219.1X159.C	300/2.07	175/6.89	175/6.89	FM  UL
200X150/8X6120D	219.1X165.1	300/2.07	175/6.89	175/6.89	FM  UL
200X150/8X6	219.1X168.3	300/2.07	175/6.89	175/6.89	FM   UL

 
 

Quality Control:

Advanced equipment guarantee the production of high quality products.
Advantages of DISA moulding line:1. High quality precise casting less scrap and lower finishing costs. 2.High Production Efficiency(1)Fast production: 350 moulds per hour, pattern changing time cut down to 2-3 minutes
(2).higher profitability over a longer service life. 3. Safety and Environmental Friendly safe, easy and clean operation (CE and ISO 14001 compliant)
High-precision, hydraulicly driven mould transport,no shifting, distortion, ordisplacement of moulds.
The advantage of the sand supply system:The sand supply system is from the best class sand processing equipment manufacturers of China, with straight structure, easier maintenance, environmently friendly, high degree of automation, high safety factor, good parameters of sand stability.

Fluid Tech is honored as the National enterprise technical center and is capable and qualified to conduct full series of tests and inspections including chemical checking, etc. Inspection facilities include:spectrometer, carbon sulfur analyzer, metallurgical microscope, tensile strength testing equipment, pressure testing equipment, adhesive force testing equipment, CMM, hardness tester, etc.From incoming inspection to finished product, quality is checked a
nd monitored in the whole process. Each step of the manufacturing process is carefully documented, regularly reviewed for revision control and updatin
g standard. Quality procedures are constantly monitored and updated to assure that only the highestand most consistent quality products are supplied to our valued customers.

Application and Case

Products are used in fire protection system, water system, HVAC system, plumbing, gas system, irrigation system, etc.These products are used in many projects , such as China Taiwanese Building 101, Xiamen Building,Wuhan Expo Building and other famous landmark projects.

FAQ

1. What is the minimum quantity of the order? 
Answer: The purchase volume of mixed products is 4 tons

2. How long is the delivery time of the order?
Answer: The delivery time for general orders is about 30 days. If the order is urgent and we have stock, around 7 days.

3. What payment methods do you accept?
Answer: We accept payment terms such as TT, L/C, DP, Western Union, Paypal, etc.

4. Where is your departure port of shipment? Is it possible to deliver to the designated warehouse?
Answer: The port of departure of our goods is generally Tianjin Port or Qingdao Port. We can transport the goods to designated warehouses, such as Yiwu, Guangzhou, etc.

5. What certificates do your products have?
Answer: Our products have FM/UL certificates, and we cooperate with third-party quality inspection certification before the factory, such as SGS,TUV

6.What are the series of your products?
Answer: Our products are divided into heavy series, medium series and light series according to different markets and standards. In order to buy more competitive products for you, please communicate your purchasing needs with the salesperson.

7. Do product packaging cartons and labels support customization?
Answer: Packaging cartons and labels can be customized according to customer requirements.

8.Does the purchased product support customization?
Answer: The product supports customization, but there are purchase quantity requirements and mold costs. For details, please consult the salesperson.

9.What are the packaging methods of the product?
Answer: The packaging of the product includes carton packaging, pallet packaging, wooden box packaging, and woven bag packaging.