Wet Type Hydrant for Fire Protection System Use UL&FM Certified

Product Description

Product Description

Product:Grooved Butterfly Valve with Tamper Switch, with Long Neck (XD381X-BL)
Code:XD381X-BL
Size:  2"-12"(DN50-DN300)
Material: Ductile iron ASTM A536, 65-45-12/Cast Iron ASTM A126 Class B/EN-GJS-450-10/ ENJS1040
Dimension: AWWA C515,ASME B16.10,BS5163,AWWA C503, BS & DIN Standard, BS750,EN1074,BS EN14339, BS 5041, BS 5154
Connection: AWWA C606, ASME B16.1 CL 125, ISO 5211,ASTM A888, ISO 6182, BS EN 1092-2
Pressure Rating: 300PSI 
Temperature: -10-120 ºC
Surface Treatment: ANSI/AWWA C550,Epoxy coated interior and exterior by Electrostatic
Certificate: UL Listed/FM Approved /NSF/ANSI61&NSF/ANSI 372
Medium: Water, gas,Drain Pipe,Fire Protection Systems etc.

PRODUCTS DETAILS:

what is the Grooved Butterfly Valve with Tamper Switch  (XD381X-BL) ?What are the materials of each part of Grooved Butterfly Valve with Tamper Switch?

The Grooved Butterfly Valve with Tamper Switch, specifically the XD381X-BL, is a type of butterfly valve designed for use in piping systems, and it includes a tamper switch for monitoring and control purposes. The materials used in the construction of each part of the valve can vary depending on the manufacturer and the specific model. However, I can provide you with a general idea of the typical materials used in the construction of butterfly valves:
1. Body Material:
Common materials for the valve body include cast iron, ductile iron, stainless steel, or other alloys. The choice of material depends on factors such as the type of fluid, pressure, and temperature conditions.
2. Disc Material:
The disc, which is the rotating part controlling the flow, is often made of materials like stainless steel, ductile iron, or other corrosion-resistant alloys.
3. Seat Material:
The seat is the part that forms the seal with the disc to prevent leakage. Resilient materials like EPDM (ethylene propylene diene monomer), Nitrile, or other elastomers are commonly used for the seat.
4. Shaft Material:
The shaft connects the actuator to the disc and is responsible for the rotation of the disc. Stainless steel is a common choice for the shaft due to its corrosion resistance.
5. Tamper Switch Components:
The tamper switch components can vary, but they typically include electronic elements such as sensors, switches, and wiring. The housing for the tamper switch may be made of materials like plastic or metal.

It's essential to refer to the manufacturer's specifications or contact the supplier directly to get accurate and detailed information about the materials used in the XD381X-BL model. The choice of materials is critical to ensuring the valve's performance, durability, and compatibility with the specific conditions of the application.




DRAWING:

DN		Dimensions(mm)
Inch	mm	A	B	C	φF	G	L	L1	L2	H1	H
2"	50	110	65	81±1.5	60.3	57.15	122.5	7.93	15.88	127	202
2.5"	65	122	71	97±1.5	73.0	69.09	122.5	7.93	15.88	127	202
2.5"	65	122	71	97±1.5	76.1	72.26	122.5	7.93	15.88	127	202
3"	80	122	81	97±1.5	88.9	84.94	122.5	7.93	15.88	127	202
4"	100	145	95	116±1.5	114.3	110.08	122.5	9.53	15.88	127	202
5"	125	141	111	148±1.5	139.7	135.48	122.5	9.53	15.88	127	202
5"	125	141	111	148±1.5	141.3	137.03	122.5	9.53	15.88	127	202
6"	150	177	133	148±1.5	165.1	160.90	122.5	9.53	15.88	139.5	215
6"	150	177	133	148±1.5	168.3	163.96	122.5	9.53	15.88	139.5	215
8"	200	200	164	133±3.3	219.1	214.40	122.5	11.1	19.05	198.5	274
10"	250	280	196	159±3.3	273.0	268.28	122.5	12.7	19.05	198.5	274
12"	300	300	226	165±3.3	323.9	318.29	132.0	12.7	19.05	198.5	293.5

   

Name	Material
Tighten screw at flat end	Carbon Steel Zinc Pland
Valve Body	ASTM A536,65-45-12
Q-Ring	NBR
Stub Shaft	Stainless Steel,2Cr13
Disc	ASTM A536.65-45-12+EPDM
Bolt and Nut	Carbon Steel Zinc Pland
O-Rin	NBR
Drive Shaft	Stainless Steel,2Cr13
Signal Gearbox	ASTM A536.65-45-12

 

Quality Control:

Advanced equipment guarantee the production of high quality products.
Advantages of DISA moulding line:1. High quality precise casting less scrap and lower finishing costs. 2.High Production Efficiency(1)Fast production: 350 moulds per hour, pattern changing time cut down to 2-3 minutes
(2).higher profitability over a longer service life. 3. Safety and Environmental Friendly safe, easy and clean operation (CE and ISO 14001 compliant)
High-precision, hydraulicly driven mould transport,no shifting, distortion, ordisplacement of moulds.
The advantage of the sand supply system:The sand supply system is from the best class sand processing equipment manufacturers of China, with straight structure, easier maintenance, environmently friendly, high degree of automation, high safety factor, good parameters of sand stability.

Fluid Tech Group is honored as the National enterprise technical center and is capable and qualified to conduct full series of tests and inspections including chemical checking, etc. Inspection facilities include:spectrometer, carbon sulfur analyzer, metallurgical microscope, tensile strength testing equipment, pressure testing equipment, adhesive force testing equipment, CMM, hardness tester, etc.From incoming inspection to finished product, quality is checked a
nd monitored in the whole process. Each step of the manufacturing process is carefully documented, regularly reviewed for revision control and updatin
g standard. Quality procedures are constantly monitored and updated to assure that only the highestand most consistent quality products are supplied to our valued customers.

Application and Case

Products are used in fire protection system, water system, HVAC system, plumbing, gas system, irrigation system, etc.These products are used in many projects , such as China Taiwanese Building 101, Xiamen Building,Wuhan Expo Building and other famous landmark projects.

FAQ

1. What is the minimum quantity of the order? 
Answer: The purchase volume of mixed products is 4 tons

2. How long is the delivery time of the order?
Answer: The delivery time for general orders is about 30 days. If the order is urgent and we have stock, around 7 days.

3. What payment methods do you accept?
Answer: We accept payment terms such as TT, L/C, DP, Western Union, Paypal, etc.

4. Where is your departure port of shipment? Is it possible to deliver to the designated warehouse?
Answer: The port of departure of our goods is generally Tianjin Port or Qingdao Port. We can transport the goods to designated warehouses, such as Yiwu, Guangzhou, etc.

5. What certificates do your products have?
Answer: Our products have FM/UL certificates, and we cooperate with third-party quality inspection certification before the factory, such as SGS,TUV

6.What are the series of your products?
Answer: Our products are divided into heavy series, medium series and light series according to different markets and standards. In order to buy more competitive products for you, please communicate your purchasing needs with the salesperson.

7. Do product packaging cartons and labels support customization?
Answer: Packaging cartons and labels can be customized according to customer requirements.

8.Does the purchased product support customization?
Answer: The product supports customization, but there are purchase quantity requirements and mold costs. For details, please consult the salesperson.

9.What are the packaging methods of the product?
Answer: The packaging of the product includes carton packaging, pallet packaging, wooden box packaging, and woven bag packaging.