Customization: | Available |
---|---|
After-sales Service: | Yes |
Warranty: | 3 Years |
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
A grooved reducing cross is a pipe fitting that allows four pipes of different diameters to be connected in a cross configuration. It has three differently sized inlets for entering the pipe and a fourth, usually smaller, outlet. The "groove" aspect refers to the method of joining pipes, typically using grooves on the pipe ends along with gaskets and coupling systems to achieve a strong and sealed connection.
When using a grooved reducing cross to join two pipes, you will follow a similar process to other grooved fittings:
Grooving the Pipe Ends: Make sure the ends of the pipes you want to join are grooved. This involves creating a groove or notch in the end of the tube to facilitate a grooved connection.
Gasket Installation: Place a gasket in the grooved end of each pipe. Gaskets provide a seal between pipes to prevent leaks.
Locating the groove reducing spool: Insert the grooved end of the pipe into the appropriately sized opening on the groove reducing spool. Make sure the pipe fits securely into the groove.
Fitting installation: Place the fitting on the grooved end of the pipe, covering the gasket. The joint is responsible for holding the pipes together and maintaining the integrity of the seal.
Tighten the coupling: Use the required tools to tighten the coupling to ensure the connection is tight and leak-free. Follow the manufacturer's specifications for torque or tightening procedures.
The exact steps may vary depending on the specific design of the groove reducing tee and the manufacturer's guidelines. Be sure to refer to the manufacturer's documentation and follow any applicable industry standards and codes for proper installation.
The groove connection method is commonly used in applications that require fast and reliable installation, such as fire protection systems, HVAC (heating, ventilation, and air conditioning) systems, and various industrial piping systems.
Nominal Size mm/in |
Pipe O.D mm |
Working Pressure PSI/Mpa |
Dimensions mm/in | |
L1 | L2 | |||
100X25/4X1 | 114.3X33.7 | 300/2.07 | 102/4.01 | 102/4.01 |
100X32/4X1Y4 | 114.3X42.4 | 300/2.07 | 102/4.01 | 102/4.01 |
100X40/4X1V2 | 114.3X48.3 | 300/2.07 | 102/4.01 | 102/4.01 |
100X50/4X2 | 114.3X60.3 | 300/2.07 | 102/4.01 | 102/4.01 |
100X65/4X30D | 114.3X76.1 | 300/2.07 | 102/4.01 | 102/4.01 |
100X80/4X3 | 114.3X88.9 | 300/2.07 | 102/4.01 | 102/4.01 |
125X32/5120DX1Y4 | 139.7X42.4 | 300/2.07 | 124/4.88 | 124/4.88 |
125X40/5120DX112 | 139.7X48.3 | 300/2.07 | 124/4.88 | 124/4.88 |
125X50/5120DX2 | 139.7X60.3 | 300/2.07 | 124/4.88 | 124/4.88 |
125X65/5120DX212 | 139.7X76.1 | 300/2.07 | 124/4.88 | 124/4.88 |
125X80/5120DX3 | 139.7X88.9 | 300/2.07 | 124/4.88 | 124/4.88 |
150X25/6120DX1 | 165.1X33.7 | 300/2.07 | 140/5.50 | 140/5.50 |
150X32/6120DX114 | 165.1X42.4 | 300/2.07 | 140/5.50 | 140/5.50 |
150X40/6120DX112 | 165.1X48.3 | 300/2.07 | 140/5.50 | 140/5.50 |
150X50/6120DX2 | 165.1X60.3 | 300/2.07 | 140/5.50 | 140/5.50 |
150X65/6120DX3OD | 165.1X76.1 | 300/2.07 | 140/5.50 | 140/5.50 |
150X80/6120DX3OD | 165.1X88.9 | 300/2.07 | 140/5.50 | 140/5.50 |
Advanced equipment guarantee the production of high quality products.
Advantages of DISA moulding line:1. High quality precise casting less scrap and lower finishing costs. 2.High Production Efficiency(1)Fast production: 350 moulds per hour, pattern changing time cut down to 2-3 minutes
(2).higher profitability over a longer service life. 3. Safety and Environmental Friendly safe, easy and clean operation (CE and ISO 14001 compliant)
High-precision, hydraulicly driven mould transport,no shifting, distortion, ordisplacement of moulds.
The advantage of the sand supply system:The sand supply system is from the best class sand processing equipment manufacturers of China, with straight structure, easier maintenance, environmently friendly, high degree of automation, high safety factor, good parameters of sand stability.
Fluid Tech is honored as the National enterprise technical center and is capable and qualified to conduct full series of tests and inspections including chemical checking, etc. Inspection facilities include:spectrometer, carbon sulfur analyzer, metallurgical microscope, tensile strength testing equipment, pressure testing equipment, adhesive force testing equipment, CMM, hardness tester, etc.From incoming inspection to finished product, quality is checked a
nd monitored in the whole process. Each step of the manufacturing process is carefully documented, regularly reviewed for revision control and updatin
g standard. Quality procedures are constantly monitored and updated to assure that only the highestand most consistent quality products are supplied to our valued customers.